TFG-3025 Dual Channel Digital 25MHz Function Arbitrary Waveform Generator
Additional files
TFG-3025-front-750-750.jpg★Frequency range 1μHz~25MHz
★Sampling rate 300MSa/s, vertical resolution 16 bits, waveform length 2M points
★2 independent output channels at same frequency range
★4.3-inch TFT LCD display
★7 standard waveforms, 160 built-in arbitrary waveforms
★16-order Harmonic waveform output
★Modulations: AM, DSB-AM, FM, PM, ASK, FSK, PSK, BPSK, QPSK, 3FSK, 4FSK, OSK, PWM
★Synchronous output of CH1 and CH2
★Multiple I/O: waveform output, sync signal output, modulation input, 10MHz clock input/output and trigger input/output
★Powerful arbitrary waveform editing PC software, support SCPI commands
★80MHz counter, support measurement of frequency, period, duty cycle, positive pulse width and negative pulse width
★Over voltage, over current, short circuit and reverse voltage protections
★Interface: USB device, USB Host
★SCPI commands
Model |
TFG-3025 |
||
Output frequency |
1μHz~25MHz |
||
Output channel |
2 |
||
Sampling rate |
300MSa/s |
||
Voltage resolution |
16 bit |
||
Waveforms |
|||
Standard waveforms |
Sine, Square, Ramp, Pulse, Noise, Harmonic, DC |
||
Arbitrary waveforms |
More than 160 kinds, including Sinc, Exponential Rise, Exponential Fall, ECG, Gauss, Haver Sine, Lorentz, Dual-Tone, etc. |
||
Frequency Characteristics |
|||
Sine |
1uHz~25MHz |
||
Square |
1uHz~15MHz |
||
Pulse |
1uHz~15MHz |
||
Ramp |
1uHz~2MHz |
||
Harmonic |
1uHz~10MHz |
||
Noise (-3dB) |
100MHz bandwidth |
||
Arbitrary |
1uHz~15MHz |
||
Frequency resolution |
1uHz |
||
Frequency accuracy |
±1ppm, 18~28℃ |
||
Square Characteristics |
|||
Rise/fall time |
≤9ns, typical (1kHz, 1Vpp) |
||
Overshoot |
≤5%, typical (100kHz, 1Vpp) |
||
Duty cycle |
0.001%~99.999%, range varies with frequency |
||
Non-symmetry |
1% of the period + 4ns |
||
Ramp Characteristics |
|||
Linearity |
≤1% of peak output (typical, 1kHz, 1Vpp, symmetry 100%) |
||
Symmetry |
0% ~ 100% |
||
Pulse Characteristics |
|||
Period |
67ns~1Ms |
||
Pulse |
≥16ns |
||
Duty cycle |
0.001%~99.999%, range varies with frequency |
||
Rise/fall time |
≥9ns |
||
Overshoot |
≤5%, typical (1kHz, 1Vpp) |
||
Harmonic Characteristics |
|||
Harmonic order |
≤16 |
||
Harmonic type |
Even, Odd, All |
||
Harmonic amplitude |
Can be set for all harmonics |
||
Harmonic phase |
Can be set for all harmonics |
||
Arbitrary Waveform Characteristics |
|||
Waveform length |
2Mpts |
||
Vertical resolution |
16 bits |
||
Sampling rate |
1uSa/s~75MSa/s, Resolution 1uSa/s |
||
Rise/fall time |
≥9ns |
||
Overshoot |
≤5%, typical (1kHz, 1Vpp) |
||
Amplitude Characteristics |
|||
Amplitude range |
50Ω impedance: ≤10MHz: 1mVpp ~ 10Vpp ≤55MHz: 1mVpp ~ 5Vpp |
High impedance: ≤10MHz: 2mVpp ~ 20Vpp ≤55MHz: 2mVpp ~ 10Vpp |
|
Accuracy |
±1% of setting value ± 5mVpp, typical (1kHz Sine, 0V offset, >10mVpp) |
||
Flatness |
≤5MHz: ±0.1dB; ≤15MHz: ±0.2dB; ≤25MHz: ±0.3dB (relative to 1kHz Sine, 3.5Vpp, 50Ω) |
||
Unit |
Vpp, mVpp, Vrms, dBm (50Ω impedance) |
||
Resolution |
1mVpp |
||
Offset Characteristics (50Ω) |
|||
Range |
±5Vpkac+dc |
||
Accuracy |
±(1% of setting value + 5mV + 1% of amplitude) |
||
Amplitude Modulation (AM) and DSB-AM |
|||
Carrier waveforms |
Sine, Square, Ramp, Pulse, Harmonic, Arb. (except DC) |
||
Modulation source |
Internal, External |
||
Modulation waveforms |
Sine, Square, Ramp, Noise, Sinc, Exp Fall, Haver Sine, Lorentz, Gause, Dual Tone, ECG |
||
Modulation frequency |
2mHz~1MHz |
||
Modulation depth |
0%~120% |
||
Frequency Modulation (FM) |
|||
Carrier waveforms |
Sine, Square, Ramp, Pulse, Harmonic, Arb. (except DC) |
||
Modulation source |
Internal, External |
||
Modulation waveforms |
Sine, Square, Ramp, Noise, Sinc, Exp Fall, Haver Sine, Lorentz, Gause, Dual Tone, ECG |
||
Modulation frequency |
2mHz~1MHz |
||
Phase Modulation (PM) |
|||
Carrier waveforms |
Sine, Square, Ramp, Pulse, Harmonic, Arb. (except DC) |
||
Modulation source |
Internal, External |
||
Modulation waveforms |
Sine, Square, Ramp, Noise, Sinc, Exp Fall, Haver Sine, Lorentz, Gause, Dual Tone, ECG |
||
Modulation frequency |
2mHz~1MHz |
||
Modulation range |
0.0°~360.0° |
||
ASK, FSK and PSK |
|||
Carrier waveforms |
Sine, Square, Ramp, Pulse, Harmonic, Arb. (except DC) |
||
Modulation source |
Internal, External |
||
Modulation waveforms |
Square with 50% duty cycle |
||
Rate |
2mHz~1MHz |
||
BPSK |
|||
Carrier waveforms |
Sine, Square, Ramp, Pulse, Harmonic, Arb. (except DC) |
||
Data source |
PN15, PN21, 01, 10 |
||
Rate |
2mHz~1MHz |
||
QPSK |
|||
Carrier waveforms |
Sine, Square, Ramp, Pulse, Harmonic, Arb. (except DC) |
||
Data source |
PN15, PN21 |
||
Rate |
2mHz~1MHz |
||
3FSK and 4FSK |
|||
Carrier waveforms |
Sine, Square, Ramp, Pulse, Harmonic, Arb. (except DC) |
||
Modulation source |
Internal |
||
Modulation waveforms |
Square with 50% duty cycle |
||
Rate |
2mHz~1MHz |
||
OSK |
|||
Carrier waveforms |
Sine |
||
Modulation source |
Internal, External |
||
OSC time |
8ns~4.99975ms |
||
Rate |
2mHz~1MHz |
||
PWM |
|||
Carrier waveform |
Square |
||
Modulation source |
Internal, External |
||
Modulation waveforms |
Sine, Square, Ramp, Noise, Sinc, Exp Fall, Haver Sine, Lorentz, Gause, Dual Tone, ECG |
||
Modulation frequency |
2mHz~50kHz |
||
Duty deviation |
0.1%~49.9% |
||
External Modulation Input |
|||
Input range |
AM, DSB-AM, FM, PM, OSK, PWM: 75MVrms ~ ± 5VAC + DC ASK, FSK, PSK: TTL level |
||
Input bandwidth |
50kHz |
||
Input impedance |
10kΩ |
||
Sweep Characteristics |
|||
Carrier waveforms |
Sine, Square, Ramp, Pluse, Harmonic, Arb. (except DC) |
||
Sweep type |
Linear |
||
Sweep direction |
Up |
||
Sweep time |
1ms~50ks |
||
Hold time |
1ms~50ks |
||
Return time |
1ms~50ks |
||
Trigger source |
Internal, External, Manual |
||
Mark |
Falling edge of Sync signal |
||
Burst Characteristics |
|||
Carrier waveforms |
Sine, Square, Ramp, Pluse, Harmonic, Arb. (except DC) |
||
Carrier frequency |
1uHz~25MHz |
||
Bust count |
1~ 2000 000 000 |
||
Start/stop phase |
0°~360° |
||
Internal period |
2us~500s |
||
Gated source |
External trigger |
||
Trigger source |
Internal, External, Manual |
||
Frequency Counter |
|||
Measuring function |
Frequency, Period, Positive/Negative Pulse Width, Duty Cycle |
||
Frequency input |
1uHz~80MHz |
||
Gate time |
10ms~16s |
||
Level |
0~3.3V |
||
Trigger Characteristics |
|||
Trigger input |
Level |
TTL compatible |
|
Slope |
Rising or falling (selectable) |
||
Pulse width |
>100ns |
||
Trigger output |
Level |
TTL compatible |
|
Pulse width |
>60ns |
||
Max rate |
1MHz |
||
Clock Reference |
|||
External reference input |
Frequency |
10MHz+50Hz |
|
Level |
Low level: 0~400mV, high level: 2.5V~ 5V |
||
Time |
<2s |
||
Impedance |
50Ω, DC coupling |
||
Internal reference output |
Frequency |
10MHz+50Hz |
|
Level |
3.3V |
||
Impedance |
50Ω, DC coupling (typical) |
||
Sync Output |
|||
Level |
TTL compatible |
||
Impedance |
50Ω, nominal value |
||
General |
|||
Interface |
USB Host, USB Device |
||
Display |
4.3-inch TFT LCD |
||
Language |
English, Chinese (simplified) |
||
Power source |
100-240VACRMS(±10%),45Hz to 440Hz |
||
Power consumption |
<30W |
||
Fuse |
T, 0.5A, 250V, 5x20mm |
||
Operating environment |
0~40℃,<80%RH, Altidue 3,000 meters |
||
Accessories |
Power cord x1, Software CD x1, USB cable x1, BNC-BNC cable x1, BNC-Crocodile cable x1 |
||
Dimension |
265Wx110Hx310D mm |
||
Weight |
2.5kg |
Download Details |
||
Datasheet |
|