- Home
- Products
- Discontinued Products
- TOS2000_Series
Analog Oscilloscope
★ Dual channel 20MHz/40MHz/50MHz
★ High sensitivity 1mV/DIV
★ 10 times sweep magnification
★ TV synchronization; X-Y mode
★ Z-axis modulation input; CH1 signal output
★ High illumination internal graticule CRT
★ Japanese encoded switch, reliable and durable
★ Fully sealed durable attenuation switch
★ ALT triggering function, enabling simultaneous observation of two independent signals
★ Trigger level lock function; Auto synchronize function
Model |
TOS-2020 |
TOS-2040 |
TOS-2050 |
||||
Vertical system |
|||||||
Sensitivity |
5mV~5V/DIV, 10 steps in 1-2-5 sequence |
||||||
Sensitivity accuracy |
≤3%; X5MAG: ≤5% |
||||||
Verniersensitivity |
1/2.5 or less than panel indicated value |
||||||
Bandwidth |
DC~20MHz (X5MAG: DC~7MHz) |
DC~40MHz (X5MAG: DC~15MHz) |
DC~50MHz (X5MAG: DC~15MHz) |
||||
AC coupling |
|||||||
Rise time |
Approx. 17.5ns (X5MAG: Approx. 50ns) |
Approx. 8.75ns (X5MAG: Approx. 25ns) |
Approx. 7ns (X5MAG: Approx. 23.3ns) |
||||
Input impedance |
Approx. 1MΩ//Approx. 25pF |
||||||
DC balance shift |
5mV~5V/DIV: ±0.5DIV |
||||||
Vertical mode |
CH1, CH2, DUAL (ALT/CHOP), ADD, CH2 INV |
||||||
Chopping repetition frequency |
Approx. 250kHz |
||||||
Input coupling |
AC, GND, DC |
||||||
Max. Input voltage |
400V peak-peak, AC frequency≤1kHz |
||||||
Common mode rejection ratio |
>50:1 at 50kHz sine wave (set CH1 and CH2 at same sensitivity) |
||||||
CH2 INV BAL |
Balanced point variation≤1DIV (referred to graticule center) |
||||||
Horizontal system |
|||||||
Sweep time base |
0.2us~0.5s/DIV, 20 steps in 1-2-5 sequence |
||||||
Sweep time base accuracy |
±3%, X10MAG: ±5% (20ns~50ns/DIV uncalibrated) |
||||||
Vernier sweep time base |
≤1/2.5 of panel indicated value |
||||||
Sweep magnification |
X10 (Max. sweep time base 20ns/DIV) |
||||||
Position shift caused by X10MAG |
Within 2DIV at CRT screen center |
||||||
Linearity |
±5%, X10MAG: ±10% (0.2s~1us) |
||||||
Triggersystem |
|||||||
Trigger mode |
AUTO, NORM, TV-V, TV-H |
||||||
Trigger level lock |
Provided |
||||||
Trigger source |
CH1, CH2, LINE, EXT |
||||||
Trigger coupling |
AC: 20Hz to full bandwidth |
||||||
Polarity |
“+” or “-” polarity |
||||||
Sensitivity |
Frequency |
20Hz~2MHz |
2MHz~20MHz |
20MHz~40MHz |
40MHz~50MHz |
||
CH1, CH2 |
1DIV |
1.5DIV |
2.5DIV |
3DIV |
|||
ALT |
2DIV |
3DIV |
|
|
|||
EXT |
200mV |
800mV |
|
|
|||
TV: Sync pulse>1DIV (EXT: 1V) |
|||||||
External trigger input |
Input impedance: Approx. 1MΩ//Approx. 25pF Max.input voltage: 400V (DC+AC peak), AC frequency≤1kHz |
||||||
X-Y mode |
|||||||
Sensitivity |
5mV~5V/DIV, ±3% |
||||||
X-axis bandwidth |
DC~500kHz (-3dB) |
||||||
X-Y phase error |
≤3° at DC~50kHz |
||||||
Output signal |
|||||||
CH1 signal |
Min.20mV/DIV (50Ω output bandwidth 50Hz~5MHz) |
||||||
Calibration signal |
Waveform |
Positive-going square wave |
|||||
Frequency |
Approx. 1kHz |
||||||
Duty ratio |
<48:52 |
||||||
Output voltage |
2Vpp±2% |
||||||
Output impedance |
Approx. 1kΩ |
||||||
Z-axis input |
|||||||
Sensitivity |
5Vpp |
||||||
Bandwidth |
DC~2MHz |
||||||
Input impedance |
Approx. 47kΩ |
||||||
Max. input voltage |
30V (DC+AC peak), AC frequency≤1kHz |
||||||
CRT |
|||||||
Display |
6" rectangle, internal graticule, 8x10DIV (1DIV=1cm) |
||||||
Phosphor |
P31 |
||||||
Accelerating voltage |
Approx. 2kV (20MHz); Approx. 12kV (40MHz) |
||||||
Trace rotation |
Adjustable at front panel |
||||||
General |
|||||||
Power source |
AC110V/220V±10% selectable, 50/60Hz, Max.35VA |
||||||
Accessories |
Power cord x1, Operation manual x1, Probe x2 |
||||||
Dimension |
310x150x455mm |
||||||
Weight |
Approx.8kg |
Accessory List |
Analog Oscilloscope |
|||
Model |
Bandwidth |
Channel |
Special features |
TOS-2020 |
20MHz |
2 |
|
TOS-2040 |
40MHz |
2 |
|
TOS-2050 |
50MHz |
2 |
|
Download Details |
||
Catalog |
|